Nine Things That Your Parent Teach You About Car Ignition Lock > 자유게시판

Why is My Car Ignition Locked?

There are many reasons why your ignition may be stuck. The key may be dirty or may have a damaged wafer inside it. This can be repaired by sliding the key in and out of the cylinder multiple times.

Another possibility is that the pins in the lock cylinder are stuck. You can tap the cylinder lightly with a small tack-hammer.

Check the Battery

If your car is in Park or neutral, but doesn't come on when the key is inserted into the ignition, there could be a problem with the shifter switch on the transmission. This can be repaired by moving the shifter up or down to get the car into the gear.

If it's still not turning, the problem could be due to the neutral safety switch or the transmission shifter cable. A mechanic or local auto ignition key replacement locksmith can fix these problems.

It is also possible that the ignition cylinder has worn out. Over time, the ignition as well as the key can wear out, which causes them to become difficult to remove or insert. A lubricant such as silicon lock lubricant can solve this issue by allowing the wafers to slide into the place.

The lint in your pocket and the adhesive from the tape that holds packages together can build on the key, preventing it from sliding into the ignition. You can clean the keys using a cloth, or a cleaner such as Triflow to fix this issue. Also, you can use a spare key to see if the problem is with the ignition or the ignition.

You can also tap the key using a small hammer while it's in the ignition. This will cause a small vibration, which may be enough to loosen the wafers inside the ignition and allow them to slide in place. Be careful not to scratch the ignition cylinder or the key.

If all of the above methods fail, it's probably time to contact a locksmith automotive mechanic to have it examined. It could be that the key is broken in the ignition, or it may be time to replace the whole thing. If the issue is with the key the locksmith can make a new one for you. If the cylinder in the ignition is the cause then you'll need to take the Car Ignition Lock to a repair shop for it to be replaced. These issues are generally simple to solve.

Check the Steering Wheel

A steering wheel that is locked may cause the ignition to stop turning. It can happen when a driver accidentally engages the steering wheel when they exit or get into the vehicle. This is typically caused by pulling the wheel while being able to hold it against their body. It could also happen if someone in the back seat is unable to stop it when they exit the car.

This is a straightforward solution that doesn't require going to the mechanic or locksmith. First, make sure the shifter is either in Park or Neutral. If it's not, gently push or pull the gear shifter until it moves to one of these positions. It is also essential to press the brake or activate the handbrake prior to trying to turn the key.

If the wheel isn't locked a quick look at the steering column will show whether the key is engaged with the lock. This is usually identified by a small "Lock" label in the lower area of the mobile ignition lock repair services circle. It is possible to disengage this by gently moving the key or pulling it with moderate force. It is essential not to apply too much pressure since this could cause damage to the key, or even damage a wafer inside the lock cylinder.

A spare key can also be used to deactivate the lock. This may indicate that the original key has damaged and no capable of engaging the wafers inside the lock cylinder. A professional from Karl Chevrolet Webster City can create a new key if this is the case.

If the new key still isn't engaging, a quick spray of penetrating oil could aid. Simply spray a tiny amount around the ignition and keyhole, then gently tap or jiggle it until it begins to work. If this doesn't help you, it's possible to consult a specialist in your local dealership for cars. They can supply you with a new key and replace the ignition cylinder, if required.

Check the Key

If you're unable to get your key to turn in the ignition, it is possible that there is a problem with your key. You can clean any foreign material (lint from packing tape or adhesive) from the key. You could also try the key with rubbing alcohol or Goo Gone to see if it can help.

It could be that the lock pins inside are not moving properly when you insert the key. You can test an extra key by gently removing it of the ignition once you have insert it. This should allow you to be able to feel and hear if internal lock pins move, as they ought to. If you can't hear or feel any movement, you can grease them with graphite. You can purchase graphite in small tubes which can be put into the keyhole. This will allow the pins slide into position when you insert the key and also prevent them from getting stuck.

A more serious problem is that it has damaged or worn which makes it ineligible to connect the internal pins inside the ignition cylinder. This may cause the cylinder in the ignition to stop turning and prevent you from starting your car. In this situation you'll need to take your vehicle to an auto locksmith ignition replacement repair shop or locksmith for assistance.

If you're able to turn the car ignition replacement using a spare key, and you've eliminated any issues with the steering wheel or battery it could be because the ignition cylinder is worn out. You can try to unlock the lock using an abrasive screwdriver or handle of the hammer. Do not use the head. Gently tapping on the cylinder can often release it, allowing you to turn your key and start your car. If this doesn't work it is necessary to have the lock cylinder replaced by an expert mechanic.

Check the Ignition Socket

The ignition socket is where your key slides into and out of place when inserted. It is often filled with debris or as a result of regular wear and tear. You can spray some silicon lock lubricant into the ignition.

You can also employ a small hammer and gently tap the inside of the ignition cylinder, to try to loosen or reset the pins that could be out of alignment. Be careful not to overdo this, or you could cause serious damage to the ignition switch.

Before you attempt this, make sure that your car's gearbox is in neutral or park. A lot of newer vehicles come with an electronic system that locks the steering wheel when it is not in neutral or in park. This could prevent the ignition key from being turned.

If you've tried all of this and still cannot get your key to turn, it is likely that the ignition cylinder housing is in need of replacement. It is important to remember that different vehicles have different procedures for replacing the ignition cylinder.

Generally, this means removal of the plastic cover which is over the steering column and ignition and key replacement assembly. To remove it, you'll need to adjust the tilt-wheel in its lowest position. Then unscrew any fasteners holding it in the position.

After removing the cover, you'll need to remove the old ignition cylinder from the steering column. It is then essential to compare the new one that you have purchased with the original one to make sure they are a perfect match. Following this step, you can install the new ignition cylinder in the same way that you did with the old one.

Sometimes, despite all of our best efforts, the ignition will become damaged and need to be replaced. It is recommended that when this happens, you call a Tempe Locksmith. A locksmith can help you select the proper replacement and install it properly to ensure that your vehicle will be able to start up again.